![]() ![]() Below is an image of what the rear of the lens looks like. Can I purchase an adapter to make this work If so, which one I contacted Nikon but they wouldnt help me with a Vivitar lens. A friend has given me a Vivitar lens: 75-205mm macro focusing zoom, NO. dSLRs are expensive because they're system cameras, and you have to buy the other parts of the system to take advantage of their versatility. 1 I am new to photography and have a Nikon D3200. And if $150 is too expensive for a lens for you, then a dSLR may not be the right type of camera for you. In short, it'll be a pain in the ass to use.Īnd a Nikor 55-200 or 70-300 lens goes for around US$150 new on Amazon. And you won't have any EXIF information from the lens. You can't shoot in any modes other than M and A, because the body can't tell the lens what aperture to use. Your D3200 cannot meter accurately with this lens. You have to set the aperture with the lens's aperture ring. There was another version there thats a bit bigger and was a combo with a microscope. There's no electronic communication between the lens and the body as you'd have with a current Nikon lens. of 2 - Bought my first telescope and its a Vivitar - posted in Equipment (No astrophotography): I hope this one is OK. In addition, the FD/FL mount was mechanical only. The cheaper that adapter is, the softer it's likely to make your lens. But that will increase the focal length, reduce the maximum aperture, and add softness. So you'll need a lens with a glass element in it to act like a teleconverter to regain focus-to-infinity. While you gain in close focus ability, you lose in far focus ability. Which means the lens won't be able to focus past a certain point. So, if you do find a simple adapter ring and use it, your lens will be sticking about about 6mm or more (because the ring adds to the depth) too far. And the FD mount's registration distance is 42mm. Because you can't just shove a lens farther into a camera body without damaging or modifying the physical linkage somehow. However, when the mount you're adapting to is thicker than the one you're adapting from, you're in trouble. If the mount you're adapting from has a thicker registration distance than the camera you own, adapting is easy-a simple ring can make up the distance as well as make the physical linkage possible. This distance varies between mount systems, and lenses are designed specifically to work at this distance. This is the distance that the lens is held by the mount away from the image plane (the sensor, in the case of a dSLR). The main problem here is the registration distance. While you could find an adapter to mount it on a D3200, it's problematic, even for adapting onto a Canon dSLR. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |